Complete the look of your Super Record-equipped dream ride with Campagnolo's 18-gram Record Water Bottle Holder. This monocoque carbon marvel holds your bottle in the ideal position for quick and easy entry/exit. It's sleek, it's dreamy, it's 100% Campy.
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
$10.99 - $11.99
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.
The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap. - ZipStream cap features self-sealing valve - Removable CarryLoop and drinking valve for easy cleaning - Wide mouth for easy cleaning and ice cubes - Lightweight and easy to squeeze - Dishwasher and freezer safe - Phthalate and BPA free. - Double wall insulated – keeps water cold twice as long - Made in USA - Fits standard bike cages and most cup holders - Backed by a lifetime guarantee and free replacement caps
The Sunlite Side Mount Bottle Cage is perfect for full suspension bikes and smaller frames where a standard water bottle just won't fit.
- Expanding cup holder accommodates most beverage sizes - Rubber grips located inside hold beverage tightly - Rubber shims with stainless hardware clamp to any size bar
$14.99 - $24.99
The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 33g
This Stainless Steel Water Bottle Cage is deceivingly named. Though it's called a 'water bottle' cage, the lightweight, bolt-on design is fully capable of hauling bottles filled with all of your beverage selections. Tang? Check. Eggnog? Um, sure. Drink up!
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
This All-City bottle features classic styling and Specialized's Purist Technology in the larger 26 oz size. No more tasting your last beverage or the plastic. - Rinse bottle with warm water and a mild detergent and alternatively, the bottle is dishwasher-safe on the top rack - Made of food-safe LDPE # 4 plastic - BPA-free and won't leach into liquid
MSW PC-120 composite water bottle cages are a great value and fit standard mounting positions. The lightweight plastic is durable, and easily secures your bottle. - Lightweight, composite construction - Does not include mounting bolts - Embossed MSW logo
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in
Features - UD carbon fiber - Specifically designed for the performance rider - Super lightweight at just 14g
Dry your reservoir quickly with the CamelBak Reservoir Dryer.
Features - High flexibility injected Nylon material - Secure bottle design—no drop guarantee - Right side pull cage option is perfect for off-road or small frames - Weight: 41g
Sunlite's ATB Bottle Cage is made of heavier aluminum than the regular bottle cage to keep your bottle in place on bumpy rides. It's still light and looks great.
Made of a lightweight nylon composite, Serfas’ Starfighter Nylon Cage works with road and mountain bikes to hold your bottle in place and allow for easy removal.
The flat Ortlieb coffee filter holder is both ideal and practical for travel, hiking, and camping. It is not a substitute for the filter paper, but rather an alternative to traditional, bulky, hard plastic cones which take up a lot of space. Includes 5 paper filters. Simple to use: Position the Coffee Filter over the pot or cup using wooden sticks, tent pegs or cutlery which fit through the side mounted sleeves, insert filter paper size 4, spoon the coffee, pour in water and enjoy your coffee.
All-Around rotating bottle cage rotates to allow customization of bottle access. - Great for small or irregularly shaped frames. - Adjustable for custom positioning - Easy bottle access on small or irregularly shaped frames - Durable, lightweight aluminum - Easy to slide bottles in and out - Includes steel mounting bolts
- For water bottle braze-ons - Type: Cage bolt
• Black cage • w/Clips • 28 ounces
Contains all of the essential spare parts to freshen your Torpedo. - Includes: 2 Refill Lids, 2 Straw Plugs (Clear Solid and Black Slotted), Straw with Drink Valve and Dolphin Tail Screw.
$3.59 - $5.39
Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.
Sunlite's Handlebar Mount Bottle Cage lets you attach a water bottle to your handlebars for easy access. Its lightweight design is good for road and mountain use.
The unique design of Serfas’ Switch-Hitter Nylon Cage makes it adjustable for center, right or left side bottle retrieval. On any bike frame where bottle clearance is an issue, this lightweight nylon cage shines.
MSW's PC-100 Wide-Range Water Bottle Cage fits a variety of bottle sizes, ranging from 64-74mm in diameter. It's made from a rugged reinforced Nylon composite so you can count on strength and toughness. And, its super-light design means you won't even notice it's there.
MSW's PC-110 Water Bottle Cage secures your bottle while keeping weight to a minimum. The lightweight plastic is durable, and easily secures your bottle.
Origin-8 has all your hydration needs covered with their beautiful stainless-steel Flask. It features a secure screw top, holds 6 ounces of your favorite post-ride recovery drink and weighs only 92 grams empty. You'll want the Flask Cage, too, that lets you carry the Flask for easy access on your bicycle (Cage sold separately).
Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.
Giant's Gateway Bottle Cages use 5mm-thick tubular aluminum for a safe, secure, and rattle-free hold on your bottles.
Page 1 of 10 Next page