Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Headsets
$32.00
Replacement headset uppers from FSA
- Internal HS Upper Orbit-Z
- Steerer diameter: 1-1/8"
- ZS44/28.6 (36 x 45)
- 5.3/13.1mm
$25.99
- Weight: 160g
- Crown Race: 30
- S.H.I.S. Lower: EC34
- S.H.I.S. Upper: EC34
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
$15.00
-1-1/4" headset spacer kit with following sizes: 2.5mm(x1) .5mm(x2) 10mm(x2)
$36.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS41/28.6/H9/K
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 41.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 37g
$25.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$44.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: EC34/28.6/H16/K|EC34/30 /H12/K
• Top Type: EC - External Cup
• Top Head Tube Inside Dia.: 33.95mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 16mm
• Top Bearing Type: Black Oxide
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 33.95mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Polymer
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 88.29g
$44.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS41/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 41.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Weight: 24.91g
$39.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height.
- Sealed black oxide bearings
- Steel crown race with integrated seals
$69.99
The FSA Orbit X threadless headset is constructed of aluminum and features sealed cartridge bearings.
- Classic shape with modern styling for high-end road bikes
- For threadless steerers
- Forged and CNC machined 6061/T6 aluminum cups
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- Laser etched aluminum top cap
- Weight: 82g
$44.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS56/30/H4/K
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 88g
$84.99
Cane Creek's engineers were tasked with developing a no-compromise, best-in-class premium headset. With the introduction of their 110-Series, they did just that—choosing optimal materials, engineering the most effective internals and designing the best aesthetics available in a headset.
- Technical Description: EC44/33/H12/x
- Bottom Type: EC - External Cup
- Bottom Head Tube Inside Dia.: 44.00mm
- Crown Race Seat Dia.: 33.03mm
- Crown Race Type: Aluminum, Dual-Seal
- Bottom Stack Height: 12mm
- Bottom Bearing Type: Top-quality, sealed stainless steel bearings
- Material: 7075 T-6 aluminum
- Weight: 58.29 grams
$74.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$159.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$46.99
Cane Creek 40 EC Headset Lowers
- Compatible with tapered 1-1/8" to 1-1/4" steerer tubes
$79.99 - $90.00
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)
$84.99
This is the Bottom External Cup for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$39.99 - $49.99
The Origin8 Twistr Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, while the CNC-machined AL7075 crown race protects the lower bearings and fork.
- AL6061 top cap
- Forged stainless steel bolt
- Includes star nut
$52.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
$85.90
- Precision CNC-machined 7075 aluminum cups
- 1-nch option uses a 26.4mm crown race
- Tange sealed cartridge bearings, with O-ring seal
- S.H.I.S.: EC30/25.4 - 24tpi, EC30/26
- Stack: 35.3mm
- 93g
$59.95
Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These IS headsets are for frames with molded-in internal bearing cups. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty.
Upper assembly features:
- Ultralight Stem Cap with Integrated Spacer plus an aluminum bolt and a star nut.
- 7, 15, and 25mm stack height top cover options (7mm cover = 8mm total stack, 15mm cover = 15mm total stack, 25mm cover = - 25mm total stack.
- O-ring seal prevents water intrusion around the steerer tube.
- Custom-molded upper lip seal provides additional protection for the upper bearing.
- bearing top cap outer diameter 45.8 mm
$26.95
The Ritchey Comp Cartridge Drop In Integrated headset upper features full-complement, stainless steel, angular contact, sealed cartridge bearings packed with Ritchey high-webbing grease.
- "Size" = Top cap height
- Material: Alloy
- Upper Fit (S.H.I.S.): IS42/28.6
- Upper Bearing OD: 41.8
- Top Cover OD: 46
- Bearing: Sealed cartridge
- Weight: 35-44g
$18.95
The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the oversize lower bearing is designed to handle loads. Deep bearing cups promise solid insertion.
- Bearing: Retainer ball bearing
- Material: Steel/Plastic
- Stack Height: 28.3mm
$13.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$10.49 - $22.09
- Steel cups
- Steel retainer bearings
- Available in chrome or black
- Steerer Dia: 25.4mm
- Cup Dia: 30mm
$10.49 - $12.99
- Steel cups
- Steel retainer bearings
- Available in chrome or black
- S.H.I.S.: EC32/25.4-24tpi|EC32/27
- Steerer Dia: 25.4mm
- Cup Dia: 32.5mm
$28.39
• Aluminum
• Semi-sealed mechanism
• 1 1/8 inch
• S.H.I.S.: EC34/28.6, EC34/30
$20.19
- Steel cup semi-integrated design
- Threaded semi-integrated design
- Fits many Sun cruisers and others
- Caged bearing 5/32" x 22A
- Cup Diameter: 44mm
- Race Diameter: 30mm
- Stack Height: 18.2mm